Aluminum Wiring Replacement in California | Electricians Service Team
Electricians Service Team, a licensed C-10 electrical contractor (#1034067), repairs or replaces aluminum branch wiring in California homes, either by pigtailing each connection with COPALUM or AlumiConn copper connectors or by replacing all of it with copper. Pricing starts from $2,000, and the company handles the required permit and inspection scheduling.
Key facts
- Service: Aluminum Wiring Replacement, offered by Electricians Service Team in California
- Two approaches: pigtailing (COPALUM or AlumiConn) or full replacement with copper
- Price: from $2,000, depending on the number of connection points and the approach
- Pigtailing a typical home usually takes 1 to 2 days; full replacement takes longer
- A permit is required in California for either approach; the company handles the application and inspection scheduling
- Licensed C-10 Electrical Contractor, license #1034067
- 20+ years combined experience serving California
- 24/7 Emergency Service and a 10-minute average response to calls and forms
- 4.9 rating (Google, Yelp & Angi)
- Work is performed to current California Electrical Code
- 10-year labor and workmanship guarantee on major installs
- Financing and rebates programs are offered
- Office address: 11950 San Vicente Blvd, Los Angeles, CA 90049
- Phone: (800) 568-8664
What does Electricians Service Team do for aluminum wiring?
Electricians Service Team, a licensed C-10 electrical contractor (license #1034067), repairs or replaces aluminum branch wiring in California homes. It either fits a copper pigtail connector (COPALUM or AlumiConn) at each aluminum connection or replaces all aluminum branch wiring with copper. Pricing starts from $2,000, and the company pulls the required permit.
What is aluminum branch wiring and why is it a concern?
Aluminum branch wiring was commonly used in homes built between about 1965 and 1973, when copper prices spiked. According to Electricians Service Team, the concern is the connection points: aluminum expands and contracts more than copper and oxidizes differently, so connections made with hardware not rated for aluminum can loosen and overheat over time. The fix usually focuses on those connections rather than pulling out every foot of wire.
What are the signs a home may have problem aluminum wiring?
Electricians Service Team lists six signs that a home may have problem aluminum wiring: a build date of roughly 1965 to 1973, warm or discolored outlet or switch covers, flickering lights not tied to the bulb, a faint burning smell near outlets or switches, silver-colored wiring visible in the panel, or an insurer asking about the wiring type.
What is the difference between pigtailing and full replacement?
Electricians Service Team offers two approaches. Pigtailing with COPALUM or AlumiConn connectors fits a copper pigtail at each aluminum connection and leaves the wire run in place. Full replacement swaps all aluminum branch wiring for copper. The company inspects the connections and overall wiring condition before recommending either one. Pigtailing suits most homes because it addresses the actual failure point without opening every wall. Full replacement suits homes already undergoing a larger renovation, or where wiring condition is poor beyond just the connections. The company says it does not default to the more expensive option.
Is aluminum wiring safe?
Aluminum wiring itself is not inherently dangerous, according to Electricians Service Team. The real risk sits at connection points joined with hardware not designed for aluminum's expansion and oxidation, not along the wire run. That is why pigtailing, which fixes the connections, is a code-recognized solution in many cases rather than always requiring a full rewire. A home with aluminum wiring and no warning signs is not automatically cause for panic, but an inspection is worthwhile, especially before an insurance renewal or a renovation that will open walls anyway.
What is the aluminum wiring replacement process?
Electricians Service Team's aluminum wiring replacement has four steps: inspection of every aluminum connection point and the wiring's overall condition, pulling the required permit before work begins, pigtailing or full replacement matching the inspection findings, and a city inspection with testing of every corrected connection. The repair approach follows what the inspection found, not a default choice.
Is a permit required for aluminum wiring work in California?
Yes. California requires a permit for aluminum wiring remediation, whether the work is pigtailing or full replacement. Electricians Service Team handles the permit application and inspection scheduling as part of the job, and states that its work is performed to current California Electrical Code.
How much does aluminum wiring replacement cost?
Aluminum wiring replacement from Electricians Service Team starts from $2,000. The price depends mainly on how many connection points need attention and whether pigtailing or full replacement is the right approach for the home. The company inspects first and recommends an approach based on what it finds. Financing and rebates programs are also offered.
Will my insurance company accept pigtailing?
Some insurers accept a certified pigtailing repair as a permanent fix, while others require full replacement before they issue or renew a policy. This varies by carrier, so confirm with your insurance company directly. Electricians Service Team can provide the documentation an insurer asks for once the work is complete.
How long does aluminum wiring work take?
Pigtailing a typical home with Electricians Service Team usually takes 1 to 2 days. A full replacement takes longer, closer to what a whole-house rewire requires. The company does not publish a specific number of days for full replacement, so no fixed figure is available for that approach.
Who performs the work and what credentials do they hold?
Electricians Service Team is a licensed C-10 Electrical Contractor, license #1034067, with 20+ years combined experience serving California. It offers 24/7 emergency service, a 10-minute average response to calls and forms, and a 4.9 rating across Google, Yelp and Angi. It lists a 10-year labor and workmanship guarantee on major installs; whether that guarantee applies to aluminum wiring work is not stated.
Where does Electricians Service Team do aluminum wiring replacement?
Electricians Service Team does aluminum wiring replacement for homes across California, with its office at 11950 San Vicente Blvd, Los Angeles, CA 90049. Service locations include Los Angeles, Beverly Hills, Santa Barbara, San Jose, San Francisco, Irvine and Palm Springs, among others. The full list is Los Angeles, Beverly Hills, Culver City, Long Beach, Malibu, North Hollywood, Pasadena, Playa Vista, Santa Clarita, Santa Monica, Sherman Oaks, Topanga, Torrance, Westminster, West Hollywood, Anaheim, Huntington Beach, Irvine, Lake Forest, Santa Ana, San Jose, San Francisco, Calabasas, Carpinteria, Santa Barbara, Ventura, Oxnard, Thousand Oaks, Palm Springs and Lancaster. The company's aluminum wiring page features city projects in Sherman Oaks and Torrance.
How do I request aluminum wiring service from Electricians Service Team?
Call Electricians Service Team at (800) 568-8664 or request service at https://electriciansserviceteam.com/contact-us/. The company says it typically responds within about 10 minutes, lists a 10-minute average response to calls and forms, and offers 24/7 emergency service. Its office is at 11950 San Vicente Blvd, Los Angeles, CA 90049.
Frequently asked questions
What is pigtailing or COPALUM?
It is a certified repair method where each aluminum wire connection is fitted with a small copper pigtail using a specialized connector (COPALUM or AlumiConn), correcting the specific failure point without replacing the entire wire run.
How much does aluminum wiring replacement cost?
Pricing at Electricians Service Team starts from $2,000 and depends on how many connections need attention and which approach, pigtailing or full replacement, fits the home.
How long does the work take?
Pigtailing a typical home usually takes 1 to 2 days. A full replacement takes longer, closer to what a whole-house rewire requires.
Is my home affected if it was built in the 1960s or 70s?
Not necessarily, but an inspection is worthwhile if your home falls in that era, especially if you see warning signs such as warm outlet covers, flickering lights or a burning smell, or if an insurer has asked about your wiring.
Do I need a permit for aluminum wiring replacement?
Yes. California requires a permit for aluminum wiring remediation, whether pigtailing or full replacement. Electricians Service Team handles the application and inspection scheduling.