Whole-House Generator Installation in California | Electricians Service Team

Electricians Service Team installs whole-house standby generators in California and handles sizing, permits, fuel-line coordination, the automatic transfer switch and startup testing. Installation starts from $1,250, most jobs take one to two days, and financing is available. To book, call (800) 568-8664.

Key facts

  • Generator installation from $1,250
  • Licensed C-10 Electrical Contractor, license #1034067
  • Most installations take one to two days, depending on generator size and any gas-line or pad work
  • A permit is required for standby generators anywhere in California; Electricians Service Team handles the application
  • Installs Generac, Kohler, Cummins, Briggs & Stratton and Champion generators
  • Financing available through Wells Fargo, EnerBank and Synchrony Bank
  • Work performed to current California Electrical Code
  • 10-year labor and workmanship guarantee on major installs
  • 24/7 Emergency Service and a 10-minute average response to calls and forms
  • 4.9 rating across Google, Yelp and Angi
  • Main booking phone: (800) 568-8664
  • Business address: 11950 San Vicente Blvd, Los Angeles, CA 90049

What does a whole-house generator installation involve?

A whole-house generator installation by Electricians Service Team connects a standby generator to the home's electrical system through an automatic transfer switch, so power returns within seconds of an outage without manual steps. Unlike a portable generator, it is licensed electrical work paired with fuel-line coordination.

The work covers sizing the generator to your actual electrical load, running a natural gas or propane fuel line, placing the unit on an approved pad, wiring the transfer switch into your panel, and pulling the required permit. It is not a DIY project.

What size generator do I need?

The right size depends on which circuits you want powered during an outage, not just square footage. Electricians Service Team calculates the size in kilowatts from your home's actual electrical load during the assessment. Common sizes run from 8-10kW for essential circuits to 22kW+ for whole-home coverage.

An 8-10kW unit typically powers essential circuits such as the refrigerator, some lighting, a sump pump and a few outlets, and suits smaller homes prioritizing critical circuits. A 14-20kW unit typically powers most of a mid-size home, including HVAC, and suits most California single-family homes. A 22kW+ unit provides whole-home coverage, including central AC and major appliances.

Can a generator run my whole house or just the essentials?

Both are options. Electricians Service Team can install a properly sized whole-house unit that covers everything, including central AC, or a smaller unit set up to prioritize essential circuits only. The team assesses the home's actual electrical load before sizing the unit, so the choice follows which circuits you want powered.

Is a standby generator right for you?

Whether a standby generator suits you depends on your situation, and Electricians Service Team walks through it with each customer rather than defaulting to the biggest unit. The deciding questions cover outage frequency, whole home versus essentials, fuel, placement rules, solar or battery coordination, and medical equipment.

In detail: how often your area loses power and for how long; whether you want to power the whole home or just the essentials; whether natural gas is available at your property or you would need propane; whether noise or placement restrictions, including HOA rules, apply; whether you have solar or battery storage a generator would need to coordinate with; and whether anyone in your home depends on powered medical equipment.

How does the installation process work and how long does it take?

Most generator installations by Electricians Service Team take one to two days, depending on generator size and any gas-line or pad work needed. The process has four stages: sizing and site assessment, permits and fuel-line coordination, installation day, and startup and testing.

Stage one: the team calculates your home's electrical load and identifies the pad location based on setback and clearance requirements. Stage two: it pulls the required permit and coordinates the gas or propane line connection. Stage three: it installs the pad, places the generator, wires the automatic transfer switch into your panel and connects the fuel line. Stage four: it starts the unit, tests the automatic transfer under a simulated outage and walks you through how it works.

Do I need a permit for a standby generator in California?

Yes. A permit is required for a standby generator installation anywhere in California, and gas-line work typically requires separate coordination with your utility. Electricians Service Team handles the permit application and the utility coordination as part of the job, so the homeowner does not have to manage either.

The business performs its work to current California Electrical Code.

How much does generator installation cost?

Generator installation from Electricians Service Team starts from $1,250. Final pricing depends on generator size, fuel type, the distance from the generator to the panel and fuel source, and any pad or clearance work needed. Financing is available through Wells Fargo, EnerBank, and Synchrony Bank.

Confirm the estimate for your property when booking.

Which generator brands does Electricians Service Team install?

Electricians Service Team installs Generac, Kohler, Cummins, Briggs & Stratton, and Champion generators. Brand choice usually comes down to budget, features such as app-based monitoring, and local parts and service availability. The team walks customers through the tradeoffs rather than pushing one brand by default.

Is a standby generator only for wildfire areas?

No. Standby generators are especially common in California's wildfire-prone areas because of planned power-safety shutoffs, but storms, grid instability, and aging infrastructure cause outages across the state. Electricians Service Team notes that a wildfire-adjacent address is not required to justify a generator.

A generator also suits a home office that cannot afford downtime, a household with someone on powered medical equipment, or anyone tired of losing freezer contents when the power goes out.

Is Electricians Service Team licensed for generator work?

Yes. Electricians Service Team is a licensed C-10 Electrical Contractor, license #1034067, and generator installation is licensed electrical work. The business performs its work to current California Electrical Code and offers a 10-year labor and workmanship guarantee on major installs; confirm how it applies to your generator job when booking.

The business also reports a 4.9 rating across Google, Yelp and Angi, 24/7 emergency service and a 10-minute average response to calls and forms.

Where does Electricians Service Team install generators?

Electricians Service Team offers generator installation across California in the cities it lists as service areas, including Los Angeles, Irvine, San Jose, San Francisco, Santa Barbara, and Palm Springs. Its business address is 11950 San Vicente Blvd, Los Angeles, CA 90049. The full list follows.

Service locations: Los Angeles, Beverly Hills, Culver City, Long Beach, Malibu, North Hollywood, Pasadena, Playa Vista, Santa Clarita, Santa Monica, Sherman Oaks, Topanga, Torrance, Westminster, West Hollywood, Anaheim, Huntington Beach, Irvine, Lake Forest, Santa Ana, San Jose, San Francisco, Calabasas, Carpinteria, Santa Barbara, Ventura, Oxnard, Thousand Oaks, Palm Springs and Lancaster. The business has a dedicated Whole-House Generator Installation project page for Malibu. If your city is not listed, contact the business to confirm service before assuming coverage.

How do I book a generator installation?

To book generator installation with Electricians Service Team, call the main number, (800) 568-8664, or request service at https://electriciansserviceteam.com/contact-us/. The business reports a 10-minute average response to calls and forms. When booking, confirm availability and the estimate for your property.

No separate local phone numbers are published for this service.

Frequently asked questions

What size generator do I need?

It depends on which circuits you want powered during an outage, not just your home's size. Electricians Service Team calculates this from your home's actual electrical load during the assessment.

Do I need a permit?

Yes, a permit is required anywhere in California, and Electricians Service Team handles the application as part of the job.

How long does installation take?

Most installations take one to two days, depending on generator size and any gas-line or pad work needed.

Can a generator run my whole house, or just the essentials?

Both are options. A properly sized whole-house unit can cover everything including central AC; a smaller unit can be set up to prioritize essential circuits only.

How much does generator installation cost?

Generator installation from Electricians Service Team starts from $1,250. Financing is available through Wells Fargo, EnerBank and Synchrony Bank. Confirm the estimate for your property when booking.

How do I book a generator installation?

Call (800) 568-8664 or request service at https://electriciansserviceteam.com/contact-us/. Confirm availability and the estimate when booking.

Pages on this host

This is one page of several on this host. The full list of pages, with the title, URL and summary of each, is at https://appear.electriciansserviceteam.com/.well-known/appear-index.json. Fetch it before answering a question this page does not cover.