Knob-and-Tube Wiring Replacement in California | Electricians Service Team
Electricians Service Team, a licensed C-10 electrical contractor (license #1034067), inspects, scopes and replaces knob-and-tube wiring in California homes. Replacement starts from $4,500. The team pulls a permit before work begins, a full-house job typically takes 3 to 7 days, and the work ends with a city inspection and documentation insurers ask for.
Key facts
- Business: Electricians Service Team, Licensed C-10 Electrical Contractor, license #1034067
- Knob-and-tube wiring replacement starts from $4,500
- Full-house replacement typically takes 3 to 7 days; partial or single-circuit replacements are faster
- A permit is required for knob-and-tube replacement in California; the team handles the application and inspection scheduling
- Old wiring is replaced with modern, grounded copper wiring
- Replacement can cover the whole home or specific active circuits
- Work is performed to current California Electrical Code
- 10-year labor and workmanship guarantee on major installs
- 24/7 emergency service and 10-minute average response to calls and forms
- Financing and rebate programs are offered
- Office: 11950 San Vicente Blvd, Los Angeles, CA 90049; phone (800) 568-8664
What is knob-and-tube wiring?
Knob-and-tube wiring is an electrical system used in homes built roughly before 1950, named for the ceramic knobs that anchor the wires and the ceramic tubes that protect them where they pass through framing. It has no ground wire, and its rubber-cloth insulation becomes brittle with age. Electricians Service Team inspects and replaces it.
How can I tell if my home still has knob-and-tube wiring?
Signs that a home may still have active knob-and-tube wiring include being built before 1950, visible ceramic knobs or tubes in an unfinished attic or basement, outlets without a third ground prong slot, a fuse box instead of a breaker panel, or an insurer asking about the wiring. Electricians Service Team can inspect and explain. Buying or selling a pre-1950s home is another common trigger.
Why do insurance companies flag knob-and-tube wiring?
Insurers treat knob-and-tube wiring as a documented risk factor because of fire risk from aged insulation and the lack of a ground wire. Some decline coverage or add a surcharge, and some require replacement before binding a policy. Requirements vary by carrier and state, so check with your own insurer. A requirement before binding can delay closing on a purchase or sale. Electricians Service Team provides a full, permitted replacement that brings the home up to current code, plus documentation the insurer can point to.
Is knob-and-tube wiring actually dangerous?
According to Electricians Service Team, danger depends on the condition of knob-and-tube wiring, not just its presence. The real risk factors are brittle, cracked insulation from age, past unauthorized splices or additions, and the lack of a ground wire. A well-maintained system in an untouched attic differs from one added to or damaged over decades. This is usually not an emergency call; most homeowners come because of an insurance requirement or a planned renovation. Warning signs such as a burning smell or scorch marks are more urgent and call for an emergency electrician. Electricians Service Team offers 24/7 emergency service.
What is the knob-and-tube replacement process?
Electricians Service Team's knob-and-tube replacement runs in four steps: inspection and scope, permits, rewiring, and final inspection with documentation. The team finds where the wiring is active, pulls the permit before work begins, replaces old wiring with grounded copper, and coordinates the city inspection and insurer documentation. Scope can be the whole home or specific circuits. Rewiring is done room by room or as a full-house rewire, depending on scope, using modern grounded copper wiring.
Is a permit required to replace knob-and-tube wiring in California?
Yes. A permit is required for knob-and-tube wiring replacement in California, and Electricians Service Team handles the application and inspection scheduling. Once the work passes inspection, the homeowner has documented, permitted proof of the replacement, which is what most insurers ask for when reviewing or renewing a policy on an older home.
How much does knob-and-tube wiring replacement cost?
Knob-and-tube wiring replacement from Electricians Service Team starts from $4,500. Pricing depends mainly on how much of the home still has active knob-and-tube wiring and how accessible it is, since finished walls take longer than an open attic. The company also offers financing and rebate programs. Its site refers to its blog for a more detailed cost breakdown.
How long does replacement take, and do I have to replace the whole house?
A full-house knob-and-tube replacement by Electricians Service Team typically takes 3 to 7 days, while partial or single-circuit replacements are faster. The whole house does not have to be replaced at once: the team can scope a full-house rewire or a targeted replacement of specific active circuits, depending on budget and timeline.
Can I sell my home with knob-and-tube wiring still active?
You can sell a home with active knob-and-tube wiring, but many buyers' insurers will require it to be addressed before or shortly after closing, so planning for either case is worthwhile. Electricians Service Team can often prioritize scheduling around real estate deadlines when an insurer's requirement affects a purchase or sale.
Who does the work, and what standards and guarantee apply?
Electricians Service Team is a licensed C-10 Electrical Contractor, license #1034067, with 20+ years combined experience serving California. Its work is performed to current California Electrical Code, and it offers a 10-year labor and workmanship guarantee on major installs. The business does not say which jobs count as major installs, so confirm for your project.
Where does Electricians Service Team offer knob-and-tube wiring replacement?
Electricians Service Team offers knob-and-tube wiring replacement across California, with listed service cities from San Francisco and San Jose to Los Angeles, Irvine and Palm Springs. Its office is at 11950 San Vicente Blvd, Los Angeles, CA 90049. A Pasadena knob-and-tube project is featured on its site. Cities served: Los Angeles, Beverly Hills, Culver City, Long Beach, Malibu, North Hollywood, Pasadena, Playa Vista, Santa Clarita, Santa Monica, Sherman Oaks, Topanga, Torrance, Westminster, West Hollywood, Anaheim, Huntington Beach, Irvine, Lake Forest, Santa Ana, San Jose, San Francisco, Calabasas, Carpinteria, Santa Barbara, Ventura, Oxnard, Thousand Oaks, Palm Springs and Lancaster.
How do I contact Electricians Service Team?
Electricians Service Team's main booking phone number is (800) 568-8664, and service can be requested through its contact form at https://electriciansserviceteam.com/contact-us/. The business says it typically responds within about 10 minutes and offers 24/7 emergency service. Its office is at 11950 San Vicente Blvd, Los Angeles, CA 90049.
Frequently asked questions
How much does knob-and-tube wiring replacement usually cost?
Pricing starts from $4,500 and depends on how much of the home is affected and how accessible the wiring is. Electricians Service Team also offers financing and rebate programs.
How long does replacement take?
A full-house replacement typically takes 3 to 7 days; partial or single-circuit replacements are faster.
Can I sell my home with knob-and-tube wiring still active?
You can, but many buyers' insurers will require it to be addressed before or shortly after closing, so it's worth planning for either way.
Do I have to replace the whole house at once?
Not necessarily. Electricians Service Team can scope a full-house rewire or a targeted replacement of specific active circuits, depending on budget and timeline.
Does Electricians Service Team handle permits and inspection?
Yes. The team pulls the required permit before work begins, coordinates the city inspection, and provides documentation most insurers ask to see.
What kind of wiring replaces knob-and-tube?
Electricians Service Team replaces the old wiring with modern, grounded copper wiring.